Archived Mold Remediation Blog Posts
Keeping Your Bathroom in Guilford Mold-Free: Simple Prevention Tips
4/8/2024 (Permalink)
Mold in your bathroom can be unsightly, unhealthy, and require a professional to properly address.
Mold – the mere mention of the word can send shivers down the spine of any homeowner. It's a nuisance that thrives in damp, humid environments, and unfortunately, bathrooms are often ground zero for mold growth. However, with a few simple prevention measures, you can keep mold at bay and keep your bathroom in safe and sanitary conditions.
Ventilate, Ventilate, Ventilate:
Adequate ventilation is crucial for preventing mold growth in your bathroom. After showers or baths, make sure to run the exhaust fan or open a window to allow excess moisture to escape. If your bathroom lacks proper ventilation, you should heavily consider installing a vent fan to help keep humidity levels in check.
Keep It Dry:
Moisture is mold's best friend, so it's essential to keep surfaces dry whenever possible. Wipe down the shower walls, tub, and sink after each use to prevent water from lingering and creating a breeding ground for mold. Don't forget to dry bath mats and shower curtains, too!
Fix Leaks Promptly:
Even a small leak can lead to big problems when it comes to mold growth. Keep an eye out for any signs of water damage, such as dripping faucets or water stains on walls or ceilings, and address them promptly to prevent mold from taking hold.
Seal Grout Lines:
The grout between tiles is a prime target for mold growth, as it provides the perfect environment for mold spores to take root. To prevent mold from infiltrating your grout lines, seal them regularly with a quality grout sealer to create a protective barrier against moisture and mold.
Clean Regularly:
Regular cleaning is essential for keeping mold at bay in your bathroom. Use a mold-inhibiting cleaner to scrub down surfaces, paying special attention to areas prone to moisture, such as shower walls, grout lines, and around sinks and toilets. Don't forget to clean your shower curtain and bath mats regularly, as well.
Use a Dehumidifier:
If your bathroom tends to stay humid even with proper ventilation, consider using a dehumidifier to help remove excess moisture from the air. This can be particularly beneficial in bathrooms with poor ventilation or in humid climates where mold growth is more likely.
Keep It Clutter-Free:
Clutter not only creates hiding spots for mold but also makes it harder to clean and maintain your bathroom. Keep countertops, shower shelves, and other surfaces clear of unnecessary items to make cleaning easier and to discourage mold growth.
What To Do If You Need Bathroom Mold Removal in Guilford, CT
When you already have a mold issue in your bathroom, the best course of action is to use professionals who can properly remediate the issue. Household solutions like simple bleach are unlikely to fully remove mold, and improper cleaning methods can even worsen the issue.
With almost over two decades of experience, you can trust SERVPRO of Branford/Shoreline to provide expert and professional bathroom mold remediation in Guilford, CT.
Call us today to schedule a free inspection and estimate!
Basement Mold Remediation in North Branford, CT
11/22/2022 (Permalink)
When you discover mold in your basement, we're Here to Help provide the most expert basement mold removal in North Branford, CT.
Get A Free Estimate For Basement Mold Removal in North Branford, CT!
Because mold thrives in damp and humid conditions, basements often create the perfect environment for mold growth.
When mold growth forms inside the home, it can quickly spread, create musty odors, and even pose serious health problems for you and your family.
When you need professional basement mold removal near North Branford or the surrounding areas, SERVPRO of Branford/Shoreline is Here to Help.
Call Our Office To Schedule A Free Estimate - 800-734-3213
Expert Basement Mold Remediation Services in North Branford, CT
Full Cleaning & Sanitizing
Free Mold Inspections
Free Mold Removal Estimates
When you’re dealing with mold in your home, you want to take quick action to address it. When mold issues go unaddressed, they can quickly worsen or spread to various areas throughout your property.
With over 15 years of experience as your local mold removal company, you can trust SERVPRO of Branford/Shoreline to handle any size mold problem. Our team is IICRC Certified, with all of the training and resources needed to properly remediate the mold in your basement.
When you need professional basement mold removal in North Branford, CT, our team provides the most expert service to make your basement mold “Like it never even happened.”
Common Causes of Basement Mold Growth
Basement Mold Remediation Process
While SERVPRO of Branford/Shoreline develops a specialized plan for each basement mold remediation in North Branford, CT, the overall process stays the same.
Step 1: Inspection and Mold Damage Assessment
A Project Manager carefully inspects all of the visible mold on your property to create a careful plan for your basement mold removal in North Branford, CT. Here, they also take moisture readings to determine if a moisture problem is the cause of your mold problem.
Step 2: Mold Containment
SERVPRO of Branford/Shoreline implements various containment methods to help prevent the spread of mold spores during the remediation process. This step is usually completed by using physical barriers or negative air chambers to isolate the air.
Step 3: Air Filtration
Your local SERVPRO in North Branford, CT uses industrial air scrubbers, HEPA vacuums, and other specialized filtration equipment to remove microscopic mold spores from the air. This step is also key in preventing the spread of mold or lingering spores while the remediation project is in progress.
Step 4: Removing Mold and Mold-Infested Materials
The basement mold remediation process can vary significantly depending on the amount of mold growth and the types of surfaces affected. In most cases, our professionals disinfect with antifungal and antimicrobial treatments to eliminate and help prevent new mold colonies from forming. In cases of severe infestation, we may need to remove and dispose of mold-infested porous materials, like drywall and carpeting, to properly remediate the mold. Non-porous materials, like concrete basement walls, can be treated instead of removed.
Step 5: Cleaning Contents and Sanitizing
Our mold removal experts clean, repair, and disinfect all salvageable items and structures affected by your basement mold. Since mold can often cause musty odors, we’re trained to remove them and provide deodorization using fogging equipment.
Step 6: Restoration
Depending on the level of mold damage, drywall, subfloors, and other building materials may have been removed during the process of your basement mold remediation in North Branford, CT. Our in-house construction division completes any needed repairs or renovations during the restoration step to get your home or business back to normal.
Call For A Free Estimate For Basement Mold Removal in North Branford, CT - 800-734-3213
Basement Mold Removal in Northford, CT
8/18/2022 (Permalink)
SERVPRO of Branford/Shoreline provides free estimates for basement mold remediation in Northford, CT!
Mold in Your Basement in Northford, CT? Get A Free Estimate!
Did you know that your basement is one of the top places to find mold in your home or business? Since basements are prone to high levels of humidity, moisture, and lack of ventilation, it’s common to find mold growing in this space.
When you need professional basement mold remediation in Northford, CT, SERVPRO of Branford/Shoreline is Here to Help 24 hours a day.
Call Today To Schedule A Free Estimate - 800-734-3213
Professional Basement Mold Remediation Services in Northford, CT
Free Mold Inspections
Free Mold Removal Estimates
When you discover mold in your basement, you want to be sure that the problem is taken care of properly. When mold issues go unaddressed, it’s likely that mold growth will worsen or spread to other areas of your home.
As your local mold removal company with over 15 years of experience in basement mold removal near Northford and the surrounding areas, you can trust SERVPRO of Branford/Shoreline to handle any size mold cleanup. Our team of IICRC Certified restoration specialists have all of the training and resources to understand how mold forms and thrives, as well as how to properly remediate it.
When you need professional basement mold removal in Northford, CT, our goal is to make your mold problem “Like it never even happened.”
Common Causes of Basement Mold Growth
Basement Mold Remediation Process
Although SERVPRO of Branford/Shoreline will create a unique plan for each basement mold remediation in Northford, CT, the general process stays the same.
Step 1: Inspection and Mold Damage Assessment
A Project Manager thoroughly inspects all visible mold to create a plan for basement mold removal services in Northford, CT. They will also take moisture readings to help determine if a moisture problem needs to be addressed.
Step 2: Mold Containment
Your local SERVPRO in Northford, CT uses a variety of containment methods to help prevent mold spores from spreading throughout the remediation process. This step is usually completed by using physical barriers or negative air chambers to isolate the air. Our crew will also turn off your property’s fans and HVAC system to prevent mold spores from spreading.
Step 3: Air Filtration
Our team uses air scrubbers, HEPA vacuums, and other filtration equipment to capture microscopic mold spores out of the air. This step also aids in preventing the spread of mold or lingering spores while remediation is in progress.
Step 4: Removing Attic Mold and Mold-Infested Materials
Depending on the severity of mold growth and the types of surfaces involved, the mold remediation process can vary significantly. In most cases, our remediation professionals will use antifungal and antimicrobial treatments to eliminate and help prevent new mold colonies from forming. In cases of severe infestation, it may also be necessary to remove and dispose of mold-infested porous materials, like drywall and carpeting.
Step 5: Cleaning Contents and Sanitizing
Our specialists clean, repair, and disinfect all salvageable items affected by mold. We’re also trained to remove unwanted odors using air scrubbers and fogging equipment.
Step 6: Restoration
Depending on the level of mold damage, drywall, subfloors, and other building materials may have been removed during the process of basement mold remediation in Northford, CT. The restoration step gets your home or business back to normal.
Schedule A Free Estimate For Basement Mold Removal in Northford, CT - 800-734-3213
Bathroom Mold Removal in Guilford, CT
6/29/2022 (Permalink)
When you find mold in your bathroom in Guilford, CT, SERVPRO of Branford/Shoreline is here to provide a free remediation estimate!
Bathroom Mold in Guilford, CT? Get A Free Estimate For Remediation!
Finding mold in your bathroom is a problem that no homeowner wants to deal with. Since bathrooms are one of the most common places for moisture to live in your home, mold in this space is far from uncommon.
When you need bathroom mold remediation in Guilford, CT, SERVPRO of Branford/Shoreline is here to provide a free estimate!
Call Us For A Free Mold Remediation Estimate - 800-734-3213
Expert Bathroom Mold Remediation in Guilford, CT
Full Cleaning & Sanitizing
Free Mold Inspections
When you find mold in your bathroom, you want to be sure that the problem is taken care of properly. When bathroom mold goes unaddressed, it increases the possibility of mold growth spreading to other areas of your home.
As your local mold removal company with over 15 years of experience in bathroom mold removal near Guilford and the surrounding areas, you can trust SERVPRO of Branford/Shoreline to handle any size mold problem. Our IICRC Certified restoration specialists have all of the training and resources needed to understand how mold grows and thrives, as well as how to properly remediate your bathroom mold in Guilford, CT.
When you call SERVPRO of Branford/Shoreline for bathroom mold removal in Guilford, CT, our goal is to make your mold issue “Like it never even happened.”
Common Causes of Bathroom Mold in Guilford, CT
- Lack of ventilation
- Leaky toilets
- Leaky sinks or plumbing pipes
- Shower leak
- Previous water damage
Bathroom Mold Remediation Process
Your local SERVPRO in Guilford, CT will create a unique plan for your bathroom mold removal services. However, the general process remains the same.
Step 1: Inspection and Mold Damage Assessment
A Project Manager carefully inspects the visible mold in your bathroom to create a complete plan for remediation.
Step 2: Mold Containment
Our crew uses numerous containment methods to prevent the spread of mold spores throughout your property during bathroom mold remediation in Guilford, CT. This is usually completed using physical barriers and negative air chambers to isolate the area.
Step 3: Air Filtration
SERVPRO of Branford/Shoreline uses air scrubbers, HEPA vacuums, and other specialized filtration equipment to remove microscopic mold spores from the air. This step aids in preventing the spread of mold while the remediation project is in progress.
Step 4: Removing Bathroom Mold and Mold-Infested Materials
The mold remediation process can vary significantly depending on the severity of the mold damage and types of surfaces affected. In most cases, our team uses antifungal and antimicrobial treatments to eliminate and help prevent new mold colonies from forming. In cases of severe infestation, some materials may not be able to be restored and are instead disposed of.
Step 5: Cleaning Contents and Sanitizing
Our restoration specialists use a number of specialized techniques to clean and restore all salvageable structures and items affected by your bathroom mold in Guilford, CT.
Step 6: Restoration
Depending on the extent of the mold damage, drywall, subfloors, and other building materials may have been removed during mold remediation services. The restoration step gets your home or business back to normal.
Schedule A Free Estimate For Bathroom Mold Removal in Guilford, CT - 800-734-3213
Attic Mold Remediation in Guilford, CT
5/24/2022 (Permalink)
When you discover mold in your attic in Guilford, our team of mold removal specialists are Here to Help.
Mold in Your Attic? Get A Free Remediation Estimate
Your attic is one of the top spaces in your home to find mold growth. Attics typically create the perfect environment for mold to grow, but these mold issues tend to go unnoticed since most homeowners don't frequently use this space.
When you need expert assistance with attic mold removal in Guilford, CT, SERVPRO of Branford/Shoreline is here to provide a free inspection and estimate!
Call Today To Schedule A Free Estimate - 800-734-3213
Professional Attic Mold Removal in Guilford, CT
Full Cleaning & Sanitizing
Free Mold Inspections
When you find mold in your attic space, you want to be sure that the problem is taken care of properly. When attic mold problems go unaddressed, it increases the possibility of mold growth spreading to other areas of your home.
With over 15 years of experience in attic mold removal near Guilford and the surrounding areas, you can trust that SERVPRO of Branford/Shoreline has the training and resources needed to handle any size mold remediation job.
Our team of IICRC Certified restoration specialists are highly trained to provide expert attic mold removal and remediation services, as well as take steps to prevent mold from spreading to other parts of your home.
When you need a professional attic mold removal company, your local SERVPRO in Guilford, CT is ready to make your mold issue "Like it never even happened."
Common Causes of Attic Mold Growth
Mold only needs moisture, organic matter (building materials), and warm enough temperatures to thrive. There are several things that create this perfect environment for attic mold growth:
- Roof leaks
- Improper ventilation
- Lack of proper insulation
- Leaks in HVAC ductwork
- Exhaust fans letting go into attic
- High levels of humidity
Attic Mold Remediation Process
While SERVPRO of Branford/Shoreline will create a unique plan for each attic mold remediation in Guilford, CT, the general process remains the same.
Step 1: Inspection and Mold Damage Assessment
A Project Manager carefully inspects the visible mold to create a plan for complete attic mold removal in Guilford, CT. They will also take moisture readings to help determine if a moisture problem needs to be addressed so that it doesn't lead to mold again in the future.
Step 2: Mold Containment
Our crew uses various containment methods to prevent the spread of mold spores throughout your property during the attic mold removal process in Guilford, CT. This step is usually completed by using physical barriers and negative air chambers to isolate the area. We'll also turn off the property's fans and heating and cooling systems to prevent the spread of mold.
Step 3: Air Filtration
Our crew uses air scrubbers, HEPA vacuums, and other filtration equipment to remove microscopic mold spores from the air. This step aids in preventing the spread of mold while the remediation project is in progress.
Step 4: Removing Attic Mold and Mold-Infested Materials
The mold remediation process can vary significantly depending on the amount of mold growth and the types of surfaces involved. In most cases, our crew will use antifungal and antimicrobial treatments to eliminate and help prevent new mold colonies from forming. Depending on the severity of the infestation, it may be necessary to remove and dispose of mold-infested porous materials in your attic like drywall and insulation.
Step 5: Cleaning Contents and Sanitizing
Our specialists use a variety of techniques to clean and restore all salvageable items affected by mold. Our crew is also trained to remove odors and provide deodorization using fogging equipment.
Step 6: Restoration
Depending on the level of mold damage, drywall, subfloors, and other building materials may have been removed. The restoration step gets your home or business back to normal.
Schedule A Free Estimate For Attic Mold Remediation in Guilford, CT - 800-734-3213
Professional Basement Mold Removal in Guilford, CT
4/29/2022 (Permalink)
When you find mold in your basement in Guilford, SERVPRO of Branford/Shoreline can provide a free estimate for professional remediation.
Get A Free Estimate For Basement Mold Remediation in Guilford, CT!
Because basements are prone to high humidity, flooding, water damage, and poor circulation, they're one of the top places for mold to grow inside of your home. Regardless of the cause, you should have basement mold issues promptly addressed to prevent mold from spreading to other living spaces of your home.
When you need professional service for basement mold removal near Guilford or the surrounding areas, SERVPRO of Branford/Shoreline is Here to Help!
Call Our Office to Schedule A Free Estimate - 800-734-3213
Expert Service For Basement Mold Remediation in Guilford, CT
15+ Years Experience
Complete Cleaning & Sanitizing
Mold Remediation Services After Water Damage
With over 15 years of experience in basement mold removal in Guilford, CT, you can trust that SERVPRO of Branford/Shoreline has the proper training, experience, and resources to properly address any mold problem.
Our team of IICRC Certified mold removal experts fully understand how mold forms, grows, spreads, and how to properly remediate the issue to prevent it from coming back.
When you call our team for basement mold removal services in Guilford, CT, our goal is to make the presence of mold in your home "Like it never even happened."
Common Causes of Basement Mold Growth
Basement Mold Remediation Process
While your local SERVPRO in Guilford, CT creates a unique plan for each new basement mold removal project, the general process still remains the same.
Step 1: Inspection and Mold Damage Assessment
A Project Manager inspects all visible mold in your basement and takes moisture readings to help determine if water damage or a moisture problem is causing the issue, which our team can also address. Here, we determine what steps need to be taken to get rid of mold in your basement in Guilford.
Step 2: Mold Containment
To prevent the spread of mold or mold spores throughout your home during basement mold remediation in Guilford, CT, containment methods are used. This may include creating physical barriers, constructing negative air chambers, and other specialized methods as needed to contain mold to the affected area.
Step 3: Air Filtration
Commercial grade equipment like air scrubbers and HEPA vacuums are used to remove microscopic mold particles out of the air. This not only helps prevent the spread of mold during the removal process, but also helps to ensure mold spores aren't left behind and mold colonies don't reform after work is completed.
Step 4: Removing Mold and Mold-Infested Materials
Depending on the amount of mold growth and the types of surfaces involved, the mold remediation process can vary significantly. In most cases, antifungal and antimicrobial treatments are used to eliminate mold colonies and to help prevent new colonies from forming. Depending on the severity of the infestation, we may need to remove drywall, carpeting, and other porous materials. Non-porous materials like concrete basement walls can be treated rather than removed.
Step 5: Cleaning Contents and Sanitizing
We clean your furniture, decorative items, curtains, clothing, and other restorable items affected by mold, using a variety of cleaning techniques to clean and disinfect your belongings. We’re also trained to remove odors and provide deodorization using fogging equipment.
Step 6: Restoration
Depending on the level of mold damage, drywall, subfloors, and other building materials may have been removed. The restoration step gets your home or business back to normal.
Call For Free Estimate for Basement Mold Removal in Guilford, CT - 800-734-3213
Attic Mold Removal in North Branford, CT
4/1/2022 (Permalink)
When you find mold in your attic, SERVPRO of Branford/Shoreline is here to provide expert services and a free estimate.
Free Estimates For Attic Mold Remediation in North Branford, CT
Did you know that your attic is one of the top places for mold growth in your home? Since this space isn't constantly used, is susceptible to leaks, and lacks temperature control, it's the perfect place for mold to grow.
When you need professional attic mold removal near North Branford or the surrounding cities, SERVPRO of Branford/Shoreline is Here to Help!
Call Our Office To Schedule A Free Estimate - 800-734-3213
Common Causes of Attic Mold
- Roof leaks
- Improper ventilation
- Lack of proper insulation
- Leaks in HVAC ductwork
- Exhaust fans letting go into attic
- High levels of humidity
Professional Attic Mold Removal in North Branford, CT
IICRC Certified Specialists
Full Cleaning & Sanitizing
Free Mold Inspections
Free Mold Removal Estimates
While you may not always be in your attic, you shouldn't let mold in your attic to continue to grow. When you do, you increase the chance that mold spores will spread into the living areas of your home and make the issue even worse.
With over 15 years of experience in attic mold remediation in North Branford, CT, you can trust our team to handle any size mold problem in your attic space. Our IICRC Certified specialists have all the training and resources needed to quickly and fully address your attic mold problem.
When you call SERVPRO in North Branford, CT, our goal is to make your mold issue "Like it never even happened.
Attic Mold Remediation Process
Step 1: Inspection and Mold Damage Assessment
A Project Manager provides a careful visible mold inspection in your basement to determine what materials have been affected and what needs to be done to fully remediate the issue and provide an estimate for your attic mold removal in North Branford, CT.
Step 2: Mold Containment
In order to prevent mold from growing and spreading during the remediation process, our team uses various containment procedures. This may include setting up negative air chambers and setting up physical barriers to contain the affected area.
Step 3: Air Filtration
Using commercial grade air scrubber, HEPA vacuums, and other specialized equipment, our team removes microscopic mold spores out of the air. The air filtration process is essential to help prevent the spread of mold or lingering spores after the remediation process is complete.
Step 4: Removing Mold and Mold-Infested Materials
Depending on the amount of mold growth and the types of surfaces involved, the mold remediation process can vary significantly. In most cases, antifungal and antimicrobial treatments are used to eliminate mold colonies and to help prevent new colonies from forming. Depending on the severity of the infestation, we may need to remove drywall, carpeting, and other porous materials.
Step 5: Restoration
Depending on the level of mold damage, drywall, subfloors, and other building materials may have been removed. The restoration step gets your home or business back to normal.
Call For Free Estimate for Attic Mold Remediation in North Branford, CT - 800-734-3213
Basement Mold Removal in Branford, CT
3/9/2022 (Permalink)
When you find mold in your basement in Branford, SERVPRO of Branford/Shoreline can provide a free mold inspection & removal estimate.
Mold in Your Basement? We're Here to Help!
Basements are one of the top areas for mold to grow and spread around your home. High levels of humidity, moisture, and lack of ventilation which are common in basements which creates the perfect environment for mold growth.
When you need help with basement mold remediation in Branford, CT, SERVPRO of Branford/Shoreline is ready to provide expert services.
Call Our Office Today To Schedule A Free Estimate - 800-734-3213
Common Causes of Basement Mold
- High levels of humidity and no dehumidifier
- Lack of ventilation
- Previous water leaks or flooding
- Sump pump failure
- Leaks from above living space
- Appliance failures
- Burst pipes
Professional Basement Mold Removal in Branford, CT
Free Mold Removal Estimates
15+ Years Experience
Complete Cleaning & Sanitizing
Mold Remediation Services After Water Damage
Whether your basement is finished or unfinished, mold problems should be immediately handled. When they're not, mold can continue to grow and spread throughout your basement, and possibly to your upstairs living spaces.
With over 15 years of experience with basement mold removal near Branford and the surrounding cities, you can trust that SERVPRO of Branford/Shoreline has all the training and resources needed to provide expert services.
Our team of IICRC Certified mold technicians fully understand how mold grows, how mold spores spread, and how to properly remediate it to prevent it from coming back.
When you call SERVPRO of Branford/Shoreline for basement mold remediation in Branford, CT, our goal is to make the mold in your home "Like it never even happened."
Basement Mold Remediation Process
Step 1: Inspection and Mold Damage Assessment
A Project Manager provides a careful visible mold inspection in your basement to determine what materials have been affected and what needs to be done to fully remediate the issue and provide an estimate for your basement mold removal in Branford, CT.
Step 2: Mold Containment
In order to prevent the spread of mold during the remediation process, our team uses various containment procedures. This may include setting up negative air chambers and setting up physical barriers to contain the affected area.
Step 3: Air Filtration
Using commercial grade air scrubber, HEPA vacuums, and other specialized equipment, our team removes microscopic mold spores out of the air. The air filtration process is essential to help prevent the spread of mold or lingering spores after the remediation process is complete.
Step 4: Removing Mold and Mold-Infested Materials
Depending on the amount of mold growth and the types of surfaces involved, the mold remediation process can vary significantly. In most cases, antifungal and antimicrobial treatments are used to eliminate mold colonies and to help prevent new colonies from forming. Depending on the severity of the infestation, we may need to remove drywall, carpeting, and other porous materials.
Step 5: Cleaning Contents and Sanitizing
We clean your furniture, decorative items, curtains, clothing, and other restorable items affected by mold, using a variety of cleaning techniques to clean and disinfect your belongings. We’re also trained to remove odors and provide deodorization using fogging equipment.
Step 6: Restoration
Depending on the level of mold damage, drywall, subfloors, and other building materials may have been removed. The restoration step gets your home or business back to normal.
Call For Free Estimate for Basement Mold Remediation in Branford, CT - 800-734-3213
Free Estimates For Mold Removal in Guilford, CT
2/15/2022 (Permalink)
Dealing with mold removal in Guilford, CT should be left to the professionals - Call to schedule a free inspection & estimate today!
When you find mold in your home or business, you want to have the issue addressed sooner than later. This is because mold can easily spread to other parts of your property, and make the issue much worse.
However, since mold damage isn't usually covered by insurance, you need an estimate for your mold remediation in Guilford, CT. As your local mold removal company in Guilford, CT with over 15 years of experience, SERVPRO of Branford/Shoreline can provide a free inspection and estimate for mold damage in your property.
Call Now To Schedule Your Free Estimate - 800-734-3213
Professional Mold Remediation Services in Guilford, CT
Free Mold Inspection and Remediation Estimate
Containment of Affected Areas
Air Filtration For Mold Spores
When you need a free estimate for mold removal near Guilford, CT, SERVPRO of Branford/Shoreline is Here to Help! With over 15 years of experience, you can trust that our team has the training and resources to properly inspect mold damage and perform mold remediation services.
With a full understanding on how mold grows and spreads, SERVPRO of Branford/Shoreline can quickly and properly address any mold issues in your home or business.
When you call SERVPRO of Branford/Shoreline for mold removal in Guilford, CT, we'll make your indoor mold damage "Like it never even happened."
Common Areas of Mold Growth:
- Attics
- Crawlspaces and basements
- Under sinks
- Areas of consistently high moisture
- Areas affected by flooding or water damage
The Mold Remediation Process
When you need mold remediation in Guilford, CT our Project Managers create a specialized remediation plan for your specific property. However, the general process still remains the same.
Step 1: Mold Damage Inspection & Assessment
A Project Manager will inspect your property for visible signs of mold and create a remediation plan. SERVPRO of Branford/Shoreline does not provide mold testing services - in cases of suspected, non-visible mold, air quality testing is needed.
Step 2: Mold Containment
Before starting mold removal services in Guilford, SERVPRO of Branford/Shoreline takes steps to prevent the spread of mold around your home or business during the remediation process. This may include utilization of negative air chambers and turning off the HVAC system on your property.
Step 3: Air Filtration
Our team uses air scrubbers and HEPA vacuums to capture mold spores in the air or on materials. This also helps to prevent the spread of mold during the cleaning process.
Step 4: Mold Removal & Removing Mold Damaged Materials
Depending on the materials affected by mold, our team will use different techniques as necessary. Porous materials like drywall and carpeting may need to be removed and disposed of to prevent the re-occurrence of mold. Our team also utilizes antifungal and antibacterial to eliminate mold colonies and prevent new ones from forming.
Step 5: Cleaning and Sanitizing
In this step, our team cleans and sanitizes to remove odors or treat belongings that have been affected by mold.
Step 6: Restoration
Depending on the extent of your mold cleaning in Guilford, there may be repairs needed after drywall is removed or carpeting ripped up. Our in house construction division can take over as needed for complete restoration.
Call Your Local SERVPRO in Guilford, CT For A Free Mold Remediation Estimate - 800-734-3213
Can Ice Dams Cause Mold in Your Branford Home?
12/7/2020 (Permalink)
The water damage that results from ice dams on your Branford roof can cause mold to grow and spread in your home.
While mold growth isn't very common in the winter, it's not impossible. So long as there is moisture and warm enough conditions, mold can thrive in your home. Here, we will review how ice dams cause mold in your Branford home.
How Ice Dams Form
Any time that there is snow or ice on your roof, your home is at risk of forming an ice dam. These form when the temperature inside of your attic is above freezing, which causes the snow and ice on the upper areas of your roof to melt. Snowmelt then runs down and refreezes at the edge of the roof. It refreezes at the edge because this area of your roof is not subject to the same attic heat loss as the ridge.
This melting and refreezing process is what forms the ice dam. If not removed or completely melted by warm temperatures, this problem will continue to worsen over time.
How Do Ice Dams Cause Mold?
Simply, ice dams can produce mold because of the water damage they cause in your home. As snow or ice continuously melts and refreezes on your roof, water will get behind the shingles and shift them when it refreezes. This exposes the lower level of your roof and causes roof leaks.
Roof leaks can cause water damage to wood, drywall, wallpaper, carpets, ceilings, floors, insulation, and more. Water damage also means that there is a moisture problem in your home. The moisture problem caused by ice dams will create the perfect environment for mold to grow. Mold thrives on moisture, and needs temperatures just warm enough to grow and spread.
When water damage goes unnoticed from your roof leak, mold can grow anywhere water and moisture are. This means you may find mold in your attic, on ceilings, insulation, carpets, inside walls, and more. In these cases, you will need both water damage restoration and mold remediation services to restore your home to pre-damage conditions.
Preventing Ice Dams and Mold
If you don't want ice dams causing mold in your home, you'll have to take steps to prevent them from forming in the first place. Dealing with the water damage and mold growth from ice on your roof can be costly and an unwanted burden.
You can help prevent ice dams by:
- Providing proper ventilation to your attic from the outside so that it stays below freezing
- Making sure your attic is properly insulated from your living space so that heat doesn't escape into it
- Making sure that no exhaust fans discharge into your attic and cause temperatures to rise
- Making sure that your roof and gutters are free of debris so that melting snow and ice can flow freely off of your roof
- Double-checking that any ductwork in your attic is properly sealed
- Using a roof rake to get excess snow off of your roof before it can melt and refreeze
How Can SERVPRO of Branford/Shoreline Help With Ice Dams?
Our highly trained team can help with every aspect of ice dams, from ice dam removal to water damage restoration, mold remediation, and reconstruction services. Our team is on call 24/7, 365 days a year to provide immediate emergency assistance.
Call today for a free damage estimate! 800-734-3213
What is Mold?
8/7/2018 (Permalink)
What is Mold?
Molds existed on the planet long before humans and will likely exist long after the last humans are gone. Humans evolved in a world heavily populated by molds and virtually every breath we take, indoors or out, brings us in contact with mold spores. Well in the last 20 years an industry has built up around the idea of "toxic molds." This industry preys on our fears and ignorance with mold being described as "black gold" in some circles.
The reality is there is no such thing as "toxic mold." There are some mold species that are "toxigenic," that is they produce "mycotoxins." Mycotoxins are metabolites produced by molds that are capable of harming other living organisms. Molds evolved these metabolites as part of their strategy to battle bacteria (and each other). One of the most famous of these mycotoxins is a compound we call penicillin. Penicillin is produced by the mold Penicillium (one of the supposedly "toxic molds") and is essentially harmless to non-allergic humans in the concentrations encountered in our day-to-day lives.
Certainly there are people who can be deathly allergic to penicillin. Approximately five per cent of individuals have some allergic airway response to elevated mold spore concentrations. But let's put that number into perspective, about 10 per cent of people are allergic to household pets.
Issues with mold have been known since biblical times and everyone knows that you should not eat moldy food as it can make you sick. Only recently has airborne exposure been considered a concern.
It has been argued that our current generation of mold panic can be directly linked to U.S. Centers for Disease Control (CDC) studies in 1994 and 1997. At that time, the CDC incorrectly linked lung damage in children to the presence of Stachybotrys chartarum mold. In 2000, this linkage was retracted by the CDC. Unfortunately, by then the damage was done and a few very lucrative lawsuitslater, the "toxic mold" industry was born.
In order to grow, mold only needs warmth, moisture and food (often called "the mold triangle"...the mold version of "the fire triangle"). Molds will thrive at temperatures over 5 degrees C (and under about 45 degrees C) and humidity over about 50 per cent. Molds have evolved to live on pretty much anything organic in nature so can grow almost anywhere. To make it worse some molds, like Penicillium or Cladosporium, can tolerate colder temperatures. This is why you tend to find these two molds growing on rotting veggies in your fridge.
So what is the truth about mold? The fact that is understood now, that was not fully recognized in the 1990s, is that it is not the mold in your house that is making you sick. Rather it is living in conditions where mold can thrive that actually causes illnesses. As explained by the World Health Organization in 2009.
Mold Preventing in Basement
6/7/2018 (Permalink)
Mold Preventing in Basement
Control water & moisture
All of the above will be futile if you do not take steps to control excess moisture in your basement and around your home. Mold needs about 70-percent relative humidity to be active and produce spores. Reducing moisture begins with preventing water infiltration. If, for example, puddles form along basement walls after a heavy rain, examine your gutter and downspouts for clogs and disconnects. Install splash blocks and downspout extenders, if necessary. Take a level to concrete walkways that run along the perimeter of your home. If they have settled so that they now slope toward your foundation instead of away from it, call a contractor to make repairs. Slab-jacking companies can use polyurethane-injection methods to lift concrete structures, including patios and pool decks. If your walkways are built with pavers or bricks, regrading and rebuilding the path may be necessary.
Relative humidity (RH) rises above 65 percent in basements during the summer in much of the United States and Canada. If this is your situation, run a dehumidifier and set the relative humidity at 65 percent or less. Choose a model that is adequately sized for your space — small room-size dehumidifiers will not survive in a basement. Ideally your dehumidifier should include a high-performance air filter. Find a way to set up the dehumidifier to drain automatically, so you don’t have to remember to empty the reservoir every day or two. You can accomplish this in several ways.
Contact SERVPRO of Branford/Shoreline for mold remediation in Northford.
Mold Remediation in North Branford CT
6/4/2018 (Permalink)
Mold Remediation in North Branford CT
Any home or business can quickly become infested with mold with the introduction of a water source, like a roof or plumbing leak. Mold can spread throughout a property in as little as 48-72 hours, and can produce allergens and irritants that have the potential to cause other health effects.
To ensure that the mold threat is completely removed, we apply today’s most technically advanced removal & remediation techniques. We are licensed professionals, and the leading specialists in the region. We find the hidden moisture that is commonly bypassed by other companies. Just a small number of mold spores that remain can lead to re-occurrence and the remediation process may have to be repeated. Don’t let that happen. Call the mold experts in North Branford, CT now for a free consultation.
Mold Services we provide in North Branford CT:
- Mold Remediation
- Mold Removal
- Mold Testing
- Mold Inspection
If You See Signs of Mold, Call SERVPRO of Branford/Shoreline on 203-630-2273
Stop Mold Growth in Basements
5/24/2018 (Permalink)
Stop Mold Growth in Basements
Stopping mold growth in a basement is important. You should treat mold growth as soon as you notice it to prevent possible health problems or damage to your basement. Before you treat the mold, you need to identify the source of moisture that is causing the mold growth. After addressing underlying moisture issues, immediately remove the mold. To prevent future mold growth, keep the humidity level in your basement below 50%.
Find the source of the problem. Moisture control is the key to solving mold problems. If you have a wet basement, you will need to find out what is causing the water issues before you treat the mold problem. Common culprits include:
- Defective gutters
- Groundwater seepage
- Poorly designed window wells
- Ineffective subsurface drainage system
- Cracks in a house’s foundation
- Internal sources of humidity like humidifiers or frequent cooking
Address sources of internal moisture. The mold problem in your basement may be the result of internal sources of moisture, rather than moisture entering the basement from outside. Remove humidifiers from the basement, and do not cook in the basement unless absolutely necessary. Make sure other sources of moisture, like the clothes dryer and bathroom, are properly ventilated.
Fix leaking pipes, sinks, and toilets. Your basement could be wet due to a leaking pipe, sink, or toilet. Carefully examine these potential sources of moisture. If you discover a leak, fix the problem as soon as possible. If necessary, seek professional help.
If you suspect that your home or business has a mold problem, we can inspect and assess your property. If mold is found, we have the training, equipment, and expertise to remediate your mold infestation. Contact SERVPRO of Branford/Shoreline today!
Personal Protective Equipment (PPE) for Mold
5/8/2018 (Permalink)
Personal Protective Equipment (PPE) for Mold
Any remediation work that disturbs mold and causes mold spores to become airborne increases the degree of respiratory exposure. Actions that tend to disperse mold include: breaking apart moldy porous materials such as wallboard; destructive invasive procedures to examine or remediate mold growth in a wall cavity; removal of contaminated wallpaper by stripping or peeling; using fans to dry items or ventilate areas.
The primary function of personal protective equipment is to prevent the inhalation and ingestion of mold and mold spores and to avoid mold contact with the skin or eyes. The following sections discuss the various types of PPE that may be used during remediation activities.
Skin and Eye Protection
Gloves protect the skin from contact with mold, as well as from potentially irritating cleaning solutions. Long gloves that extend to the middle of the forearm are recommended. The glove material should be selected based on the type of substance/ chemical being handled. If you are using a biocide such as chlorine bleach, or a strong cleaning solution, you should select gloves made from natural rubber, neoprene, nitrile, polyurethane, or PVC. If you are using a mild detergent or plain water, ordinary household rubber gloves may be used.
To protect your eyes, use properly fitted goggles or a full face piece respirator. Goggles must be designed to prevent the entry of dust and small particles. Safety glasses or goggles with open vent holes are not appropriate in mold remediation.
Respiratory Protection
Respirators protect cleanup workers from inhaling airborne mold, contaminated dust, and other particulates that are released during the remediation process. Either a half mask or full face piece air-purifying respirator can be used. A full face piece respirator provides both respiratory and eye protection. Please refer to the discussion of the different levels of remediation to ascertain the type of respiratory protection recommended. Respirators used to provide protection from mold and mold spores must be certified by the National Institute for Occupational Safety and Health (NIOSH). More protective respirators may have to be selected and used if toxic contaminants such as asbestos or lead are encountered during remediation.
As specified by OSHA in 29 CFR 1910.134 individuals who use respirators must be properly trained, have medical clearance, and be properly fit tested before they begin using a respirator. In addition, use of respirators requires the employer to develop and implement a written respiratory protection program, with worksite-specific procedures and elements.
Protective Clothing
While conducting building inspections and remediation work, individuals may encounter hazardous biological agents as well as chemical and physical hazards. Consequently, appropriate personal protective clothing (i.e., reusable or disposable) is recommended to minimize cross-contamination between work areas and clean areas, to prevent the transfer and spread of mold and other contaminants to street clothing, and to eliminate skin contact with mold and potential chemical exposures.
Disposable PPE should be discarded after it is used. They should be placed into impermeable bags, and usually can be discarded as ordinary construction waste. Appropriate precautions and protective equipment for biocide applicators should be selected based on the product manufacturer's warnings and recommendations (e.g., goggles or face shield, aprons or other protective clothing, gloves, and respiratory protection).
Learn more about mold and what to do until help arrives by reviewing these mold damage tips.
Getting rid of the Mold
5/7/2018 (Permalink)
Getting rid of the Mold
If you choose to clean it up yourself don’t forget to use protection. A quality respirator – will keep particles out of your lungs. Wear non-porous gloves, eye protection and coveralls to protect your clothing. Open windows and make sure the room is well ventilated. Do NOT mix bleach with other cleaning products to kill the mold. Mixing bleach and ammonia and other cleaning products will produce toxic fumes which are dangerous to you.
If more than one room of your house has been flood affected, you should call in the professionals. They will bring in big fans and dehumidifiers to dry everything out. This needs to happen before you can even think of getting rid of the mold. No point wiping it off for it to grow back again! They will also be able to take care of specific mold testing and certifying how well they do the job, which the insurance company will want to see.
It is not uncommon for flooded properties to also have trouble with fire and smoke damage, from electrical fires that can occur from appliances and wiring getting wet. At SERVPRO of Branford / Shoreline we are mold specialists in Branford– we can take care of all your mold problems after flooding and deal with your insurance company too.
Want to talk to one of our professionals? Contact SERVPRO of Branford / Shoreline today for an obligation free quote.
Mold Remediation in North Branford, Connecticut
8/4/2017 (Permalink)
Mold Remediation in North Branford, Connecticut
A mold problem can present a serious health risk for people exposed at your residential property. Mold infestations can be caused by minor water intrusions like a slow roof leak or loose plumbing fitting. Every hour spent cleaning up, is an hour of lost revenue and productivity. If you suspect your property has a mold problem, call SERVPRO of Branford CT who will respond quickly and work fast to manage the situation. Mold can spread quickly through a property if left untreated.
SERVPRO professionals can respond swiftly, working to first contain the infestation to help prevent its spread to other parts of the building. Next, the crew will begin the remediation process, working safely and effectively to manage the situation. We have the training, experience, and equipment to contain the mold infestation and remediate it to its preloss condition.
When the need arises for professional cleaning or emergency restoration services, SERVPRO of Branford CT has the training and expertise to help make it “Like it never even happened.” Whether your need is removing an odor problem or deep cleaning of floors or carpets, you can depend on SERVPRO of Branford located in East Haven, CT to get the job done right the first time. We’ll respond promptly and make your home look its very best.
We are available throughout North Branford Connecticut 24 hours a day. Our expertise includes residential restoration services for fire and water damage, including electronics restoration and document drying in North Branford. Additionally, we are your best resource for mold remediation in North Branford.
Mold Remediation technicians in Branford CT
6/7/2017 (Permalink)
Mold Remediation technicians in Branford CT
Mold Growth in Your Home
Depending on how much and how toxic the mold is, Mold Remediation technicians may recommend a thorough cleaning of HVAC systems to remove mold spores and toxins from the air in the home.
SERVPRO of Branford , CT is Connecticut’s leading mold removal and sewage contamination damage remediation company that operates across Connecticut that has built it’s reputation on excellence.
Our skilled mold and sewage remediation technicians operate nationwide and carry-out essential drain and sewage spill clean-up services 24 hours a day. If you have a blocked or overflowing drain, toilet leak, backed up drain, mold issues, fire damage or flood water damage, regardless of the time of day or location, we will provide superior service quickly and effectively to ensure our clients get back to their lives as pain free as possible.
Our expert sewage remediation and restoration technician teams are equipped with the most advanced drain and SERVPRO of Branford equipment and will respond to your call immediately.
Residential Mold Remediation in Branford, CT
5/24/2017 (Permalink)
Residential Mold Remediation in Branford, CT
A mold problem can present a serious health risk for people exposed at your residential property. Mold infestations can be caused by minor water intrusions like a slow roof leak or loose plumbing fitting. Every hour spent cleaning up, is an hour of lost revenue and productivity. If you suspect your property has a mold problem, call SERVPRO of Branford CT who will respond quickly and work fast to manage the situation. Mold can spread quickly through a property if left untreated.
SERVPRO professionals can respond swiftly, working to first contain the infestation to help prevent its spread to other parts of the building. Next, the crew will begin the remediation process, working safely and effectively to manage the situation. We have the training, experience, and equipment to contain the mold infestation and remediate it to its preloss condition.
When the need arises for professional cleaning or emergency restoration services, SERVPRO of Branford CT has the training and expertise to help make it “Like it never even happened.” Whether your need is removing an odor problem or deep cleaning of floors or carpets, you can depend on SERVPRO of Branford located in East Haven, CT to get the job done right the first time. We’ll respond promptly and make your home look its very best. Learn more about our Commercial Cleaning Services.
We are available throughout Connecticut 24 hours a day. Our expertise includes residential restoration services for fire and water damage, including electronics restoration and document drying. Additionally, we are your best resource for mold remediation.
Health and Safety Related to Mold
2/8/2017 (Permalink)
Health and Safety Related to Mold
SERVPRO of Branford / Shoreline, CT understands that the health and safety of our technicians and occupants of homes and businesses that we help is our first responsibility and our #1 PRIORITY.
If your home or business experiences a water issue call us at (203) 488-8881 as soon as you realize that you have water damage occurring. We are available to help you 24 hours a day 7 days a week every day of the year, whenever a disaster occurs. We handle all aspects of water damage restoration, assisting customers with every part of the clean up and repair processes, including re-construction to rebuild after water damage has ruined part of your home.
Additionally, with water often comes mold too because moisture manufactures mold, and "Mold can cause health effects" * SO DON’T IGNORE MOLD IN YOUR HOME!
- Some types of mold are commonly known as mildew.
- Mold may live indoors or outdoors and thrives in damp, warm, and humid environments.
- Although shower stalls and basements are typical moist areas prone to the growth of molds, any moist area in the household may harbor mold.
- Allergic reactions to mold are the most common health effects and risks of mold. *
* [Click here to learn more: http://www.mayoclinic.org/diseases-conditions/mold-allergy/symptoms-causes/dxc-20200846]
The best way to prevent mold in residential areas is the control of moisture.
FIND THE UNDERLYING PROBLEM THAT IS CREATING AN ENVIRONMENT FOR MOLD TO PROSPER, IN ORDER TO REMOVE MOLD.
A common error in treating mold growth is to try to fight it with bleach because people think of bleach as the cure for killing any germs. However, bleach does not kill mold. Bleach is not going to get rid of mold. It grows back if it is not treated as thoroughly with the proper treatments as are necessary to win the fight against mold. SERVPRO of Meriden, CT has many years of training and experience and all the resources needed to kill mold and keep it from growing back.
Hire a professional to get the job done right the first time. We use science and proven techniques and chemicals that are safe for you but remove the mold, so you do not have a mold problem in your future.
24/7 Emergency Service